Products

EvGuard® film for laminated glass is available in New Zealand and Australia in different blends for specific purposes:

Clear: With UV-cut off at 395nm. This is the most commonly-used interlayer film in the EvGuard® range.

Milky White: Used in the lamination of photographic images, producing a soft focus semi-opaque result or used to produce an overall soft diffused effect rather than clear. Also with UV-cut off at 395nm.

Other colours can be achieved by inserting a PET film of the desired colour in the lamination composite. There are technical differences in the colour inserts required for internal and external use, so discuss your application with us before proceeding to lamination.

It is 220 v 50 hz and is supplied with a three pin plug.

This hand held device is so important when cleaning the edge of the glass after lamination. The Thermocutter and blades are stock items.

Used to tape the edges of the EvGuard® lamination ‘sandwich’ prior to processing. The micro-perforations in the tape ensure no air is trapped in the vacuuming segment prior to processing. Glass Lamination Systems’ approved micro-perforation tape is available in 20mm, 30mm, 40mm, 50mm. All rolls are 66m in length.

The silicone edge profiles provide an exceptionally clean edge that will save hours of manual clean-up. Glass Lamination Systems’ genuine silicone edging is reusable many times. Options available;

1. 7mm, 9mm & 12mm diameter Silicone Tubing – The tube allows for a ‘recessed finish’ of the interlayer between the glass layers.
2. 15mm x 5 mm section of extruded Silicone – The flat section provides a ‘polished edge’ finish.

Glass Lamination Systems offer a vast range of coloured inserts for both internal and external use. Please call to discuss your particular application.